Use patented technology to tailor products with high cost performance and good precision performance for customers

Contact information

Contact:Miss Xie

Cell phone:18822967880


Cell phone:Mr Ray




Add:No. 58, Baiye Road, Liaobu Town, Dongguan City, Guangdong Province

How to judge the quality of power tool die casting parts?

Release time:


As the saying goes, "Quality determines success or failure". Compared with the use of die-casting technology to make this product, customers have relatively high service life and product quality. A manufacturer specializing in the customization of high-quality zinc and aluminum alloy die-casting parts, with 12 years of die-casting experience, never maroon in product die-casting processing technology, product selection, equipment introduction, etc. We all know that a good die-casting part needs to experience two There are more than ten to process, but although the process is complicated, we must not dare to save labor, and although the material is expensive, we must not reduce material resources. So how to measure the quality of a power tool die-casting part? From the following three aspects:

1. Appearance quality includes casting surface roughness, surface quality, dimensional tolerance, geometric tolerance and quality deviation.

2. Use quality refers to the performance of castings that can meet various use requirements and work, such as wear resistance, corrosion resistance, machinability, weldability, etc.

3. Intrinsic quality refers to the chemical composition, physical and mechanical properties, metallographic structure of the die casting, as well as the pores, inclusions and cracks existing in the casting.


The products made by Dongguan Jie Aosi Die Casting Factory generally have higher profits and higher requirements for appearance quality and dimensional accuracy. To make such products, Dongguan Jie Aosi Die Casting Factory must not only do well in technology, but also in Many small aspects have to be done well.

The first thing Dongguan Jie Aosi Die Casting Factory pays attention to is the material. Zinc alloy and aluminum alloy are the main die casting materials used in Dongguan Die Casting Factory. Those who have studied chemistry know that zinc and aluminum are amphoteric substances with poor chemical stability. Acid environment or alkaline environment will be corroded, even in the air, it may be corroded or oxidized, so whether it is purchasing or storage, Dongguan Jie Aosi Die Casting Factory pays special attention to the protection of materials to avoid bad, resulting in poor die casting.


Key words:

die casting, dongguan, die casting factory